The Following Input/Output is Supported
CAMERA Output, RET Input, HD TRUNK Output, HD PROMPTER IN, AUDIO Output, INTERCOM, PGM Input, ST 2059 (PTP), TALLY
* 12G two outputs, 3Gx4 one output or TICO one output in UHD mode. HD (3G/1.5G) four outputs and SFP+ (ST 2110) two outputs are supported in HD mode.
* AK-NP600G (IP/12G/3G Interface Kit) does not support analog VBS input/output signals (OUT/PM OUT/RET IN).
* AK-UC4000 (4K Studio Camera) and AK-UCU600 (Camera Control Unit) firmware upgrades are required to install AK-NP600G (IP/12G/3G Interface Kit). See Service and Support/Pass.
* Consult with your Panasonic dealer about AK-NP600G (IP/12G/3G Interface Kit) installation.
Dimensions (W x H x D)
Approx. 175.5 mm x 28.8 mm x 138.5 mm (6-29/32 inches x 1-1/8 inches x 5-7/16 inches)
Weight
Approx. 284 g (0.63 lbs) (including radiator fins)
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Humidity
10% to 90% (no condensation)
Input/Output Section
<UHD/HS/HD SDI OUT1>
terminal
BNC x 1, 12G / 6G / 3G /1.5G HD SDI : 0.8 V [p-p], 75 Ω
<UHD/HS/HD SDI OUT2>
terminal
BNC x 1, 12G / 6G / 3G /1.5G HD SDI: 0.8 V [p-p], 75 Ω
<UHD/HS/HD SDI OUT3>
terminal
BNC x 1, 3G / 1.5G HD SDI: 0.8 V [p-p], 75 Ω
<UHD/HS/HD SDI OUT4>
terminal
BNC x 1, 3G / 1.5G HD SDI: 0.8 V [p-p], 75 Ω
<HD TRUNK/TICO OUT>
terminal
BNC x 1, 1.5G HD SDI when HD TRUNK,
3G / 1.5G HD SDI when TICO : 0.8 V [p-p], 75 Ω
<HD SDI/PROMPT IN>
terminal
BNC x 1, 1.5G HD SDI: 0.8 V [p-p], 75 Ω
<SFP+1> slot
SFP+ x 1, 10GBASE-LR
<SFP+2> slot
SFP+ x 1, 10GBASE-LR
<LAN2> terminal
RJ-45 x 1
Bundled Items
Pillar (M3 x H20) x 1, Options rear panel x 1,
Power cable x 1, Heat-transfer sheet x 1, Gaskets x 2
