OG4 is the world’s first NDI® openGear® card: four independently configurable 12G-SDI channels with 4Kp60 Full NDI® encoding and decoding, designed for 4th-generation openGear oGx frames.
OG4 is the world’s first NDI® openGear® card: four independently configurable 12G-SDI channels with 4Kp60 Full NDI® encoding and decoding, designed for 4th-generation openGear oGx frames.
Key features
4x 12G-SDI connectors, each selectable as input or output
Encode or decode up to four 4Kp60 Full NDI® (High Bandwidth) streams
Three modes: 4x encode, 4x decode, or 2x encode + 2x decode
Independent resolution and frame rate per channel
SFP+ port for 10GbE optical networking
Managed via openGear Dashboard and on-device WebUI; RESTful API, Q-SYS, Crestron and Zoom control
Requires a 4th-generation openGear oGx frame
Opengear frame support
Requires oGx frame, the 4th generation of the openGear platform.
Supported video formats
UHD 3840x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 HD 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 HD 1920x1080i 50, 59.94, 60 HD 1280x720p 50, 59.94, 60
Video i/o connectivity
12G SDI Selectable Input/Output Full-size x 4 OG4 supports up to 4x channels 12G-SDI Encode or Decode.
Audio input
SDI 2-ch Per SDI connector
Audio output
SDI 2-ch Per SDI connector
Video codec support
NDI (Full Bandwidth i-frame compression) Max. 4ch UHD 60p
Network streaming transport support
NDI Full NDI
Network connectivity
OpenGEAR Network Port (Integrated in Chassis backplane) 1 x 1Gbps SFP+ Network Port 1 x 10Gbps optional module, Optical 10GbE
Dimensions
33.5cm x 7.5cm x 2.4cm (Processor card only)
Control support
System management and control On-device WebUI, Published RESTful API, Q-Sys plugin, Crestron, Zoom, openGear Dashboard control system Health monitoring On-device WebUI
System requirements
4th Gen openGear oGx modular frame. For 1Gb Ethernet operation, the frame requires either an OG3-N or OG3-NS controller card installed. The 8322-S controller card does not provide external 1 Gb Ethernet connectivity. Both the Ross Dashboard and BirdDog WebUI interfaces must run on a computer that has a physical wired Ethernet connection. Wireless connections do not allow device discovery.
