Setting up an I/O device have never been this flexible. Connect and control anything from your tally lamps, trigger ATEM switcher routines, control a HyperDeck, change Scopes on a SmartScope Duo and route inputs/outputs on a VideoHub. Defining parameters – single or multiple – for inputs/outputs is extremely fast, thanks to the drop-down menu structure in UniSketch OS. Connect and control up to 8 devices at the same time!
The general-purpose I/O controllers offer 8/16 inputs and 8/16 outputs, all electrically separated with quality relays and optocouplers. GPO is implemented with relays shorting to GND. GPI implemented with optical isolators shorted to GND.
1 x DB25 Connector Configuration
8 GPO
8 GPI
PoE – Ethernet with PoE (IEEE802.3af)
NewTek TriCaster + Blackmagic ATEM
How to get tally from a NewTek TriCaster switcher onto a ATEM switcher? The scenario is:
Video switching done on TriCaster
ATEM Switcher utilized to control cameras (Studio Camera, URSA Mini and URSA Broadcast)
ATEM Tally needs to follow TriCaster.
The ETH-GPI Link can help to resolve this, but first please check if the SDI-GPI Link is more suitable for you.
ATEM Tally follow TriCaster Tally – GPI
In this setup the ETH-GPI Link will connect to the ATEM Switcher and set Preview/Program accordingly to the signals it receives on the GPI In.
Use the default config “ATEM Connectivity”.
ATEM Tally follow TriCaster Tally – IP
In this setup the ETH-GPI Link will connect to the ATEM Switcher + the TriCaster and via Virtual Hardware Components on the ETH-GPI Link translate Program/Preview states to the ATEM so the two switchers are in sync.
SKAARHOJ ETH-GPI Link Dual Interface
12V Power SupplyUSB-A to USB Micro-B CableLimited 1-Year Warranty
Reviews
There are no reviews yet.