For those times when you are unable to use a PTap or 2-pin power source at the camera or monitor, there are many options for powering your Transmitter or receiver with its own battery.
Options are available for small-format Canon, Sony, Panasonic, or JVC batteries. All plates feature a 2-pin power cable for output to your transmitterIncludes 2x M3 screws for Bolt 6 LT and 2x 4-40 mounting screws for legacy devices
This Battery Plate mounts directly onto the bottom of all Bolt Transmitters/Receivers, ServPro, Cube 700 Series, Cube 600 Series or COLR to charge/power with camera batteries. Power from the adapter plate is provided by an attached break-out 2pin connector.
2pin Power cable is compatible with Bolt 6. For Barrel connector cable for Ace 750, please use L Bracket Battery Adapter Plates (Battery to 5.5mm x 2.1mm DC Barrel Connector)
The Sony L-series/Canon LP-E6 Bidirectional Battery Plate is compatible with BOTH Sony L-Series Batteries and Canon LP-E6 batteries.
Please select the correct battery model for your adapter plate.