Panasonic

AK-HRP1010GJ Remote Operation Panel

4.850,00 (ex. VAT)

SKU: AK-HRP1010GJ Categories: , ,
  • 1/4 rack size, four units can be installed in a single 19-inch EIA rack.
  • High-resolution 3.5-inch color LCD touch panel and easy-to-use operation button layout.
  • IP connection supported, enabling control of studio cameras and Panasonic’s PTZ cameras*.
  • User-assignable knobs and priority buttons enable rapid operation of frequently-used functions.
  • Up to 99 cameras can be switched between and controlled with a single unit.
  • SDXC card support enables saving and loading of camera setting files and device settings.
  • * Studio Camera AK-UC4000GJ/UC4000GSJ, AK-UC3300GJ/UC3300GSJ, AK-HC5000GJ/HC5000GSJ and AK-HC3900GJ/HC3900GSJ are supported. For information on other cameras that can be connected to this device, please refer to the Compatible Controller PDF.
  • With a 1/4 rack size housing, four units can be installed in a single 19-inch EIA rack, which are used as standard around the world.
  • The layout of the operation buttons on the panel simplifies operation by prioritizing frequently-used functions. Knobs for master gain, color temperature, master flare, etc. can be assigned by users. Frequently-used functions such as gain and matrix can also be assigned to priority buttons. This enables rapid operation that can be adapted to the workflow of each location.

    Serial connection, IP connection and PoE*1 power supply are all supported. IP connection to studio cameras allows operators to control cameras from remote locations, enabling more efficient operation with fewer on-site personnel. In addition to studio camera connectivity, future support for IP connection to Panasonic’s PTZ cameras and other devices is also planned.*2

    • *1: Abbreviation of Power over Ethernet.
    • *2: Studio Camera AK-UC4000GJ/UC4000GSJ, AK-UC3300GJ/UC3300GSJ, AK-HC5000GJ/HC5000GSJ and AK-HC3900GJ/HC3900GSJ are supported. For information on other cameras that can be connected to this device, please refer to the Compatible Controller PDF.
    • The new high-resolution 3.5-inch color LCD panel now supports touch operation and provides ease of use on location through high visibility and intuitive operation.
    • The SD memory card slot enables users to save and read camera setting files and device settings using SD cards.
Power Supply 12 V DC (Power supply from camera: 10 V – 16 V DC)
42 V – 57 V DC (PoE power supply)
Current Consumption 0.9 A (Power supply from camera/CCU: 10 V – 16 V DC)
0.3 A (PoE power supply)
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 90% or less
Storage Temperature −20 °C to 60 °C (−4 °F to 140 °F)
Weight Approx. 1.7 kg (3.75 lb)
Dimensions (W x H x D) 102 mm × 385 mm × 113 mm (4 inches x 15-3/16 inches x 4-7/16 inches)
Camera/CCU Control Control signals (camera, CCU control)
Power supply 16 V DC (when CCU connected)*,
12 V DC (when camera connected)*
Maximum Cable Length When camera connected: 20 m (65.7 ft)
When CCU connected: 50 m (164 ft)
Monitor
LCD monitor LCD color monitor, touch panel support
Input/output section
<CCU> connector 10-pin, male x 1
<PREVIEW> connector 9-pin, female x 1
<LAN> connector RJ-45 x 1

Additional information

Brand

Reviews

There are no reviews yet.

Be the first to review “AK-HRP1010GJ Remote Operation Panel”

Your email address will not be published. Required fields are marked *