Teradek

Bolt 6 LT MAX TX/RX Deluxe Set Gold Mount

Bolt 6 LT is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. External Antenna models now ship with new flexible V-antennas.

12.858,12€ (ex. VAT)

Bolt 6 LT is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. External Antenna models now ship with new flexible V-antennas.

Bolt 6 LT Sets offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode. In the MAX model, Broadcast Mode also allows users to increase the number of Receivers from 6 per Transmitter to unlimited per Transmitter.

The 750 model includes V (vertical) antennas. 1500 and MAX models include both V antennas and H (horizontal) antennas. H antennas are designed to maximize signal robustness in the most challenging RF environments.

Optionally, the 750 model of Bolt 6 LT can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor.

Kit options include the Transmitter and Receiver by themselves or within a Deluxe kit that also includes Gold or V-Mount Battery plates.

Looking for even more robust signal connection when in the most challenging RF environments? Try using RF-X Auto-Switcher, built specifically for Teradek Bolt RXs to secure the best possible signal every time.

Read the Bolt 6 Internal Antenna FAQ to learn more about the optional built-in internal antennas.

Model Bolt 6 LT MAX TX/RX Deluxe Set Gold Mount
Bolt 6 LT MAX TX
Video
Video Inputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
1 x HDMI 1.4b Type-A receptacle
Video Outputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
Sdi Ancillary Data Support Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Delay Tx To Rx <0.001sec
Input Cross Conversion Yes, HDMI to SDI (4Kp23.98-30 HDMI input is scaled and looped out as 1080p23.98-30 on SDI loopout)
Supported Resolutions
Supported Resolutions 4Kp23.98/24/25/29.97/30 (HDMI only)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94 576p50
480i(NTSC)/576i(PAL)
Video Processing
Video Compression Visually Lossless
Color Correction None
Audio Processing
Audio Compression 48kHz 24-bit PCM
Inputs
Audio Input Embedded SDI/HDMI Audio Input (2 Channel)
Physical
Dimensions 60mm x 103mm x 33mm
Weight 206g (7.3oz)
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with 1/4″x20 and M3 holes
Interfaces
Configuration Interfaces OSD with Menu, Joystick Navigation
Switches On/Off Switch
Mobile App Bolt App
Desktop App Bolt Manager application for OSX & Windows
Usb Interface Functionality Upgrade via USB-C 5pin Locking Connector CCU
Bluetooth 2.4 GHz
Network
Antennas 2 External 2dBi antennas (included)
Wireless Non-DFS Frequencies:
5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz
DFS Frequencies:
5.270 ~ 5.670 GHz
Rf Channel Selection Auto, Manual
Encryption AES-256, RSA-1024 key exchange
Rf Power 23 dbm EIRP
Range Up to 5000 ft, line of sight
Unicast Multicast Can connect one Transmitter to up to 6 Receivers
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Interoperability Compatibility Can transmit wireless video to all ranges of Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device)
Power
Power Input 2-Pin Circular locking Connector 6-28 VDC
Battery None, optional Sony/Canon dual battery plate
Nominal Power Consumption 9 Watts
Environmental
Operating Temperature 0-40℃
Bolt 6 LT MAX RX Gold Mount
Video
Video Outputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
1 x HDMI 1.4b Type-A receptacle
Sdi Ancillary Data Support Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Output Video Scaling No manual settings, but all signals above 4K30 for HDMI and 1080p60 for SDI are scaled down to 1080p for corresponding output
Supported Resolutions
Supported Resolutions 4Kp23.98/24/25/29.97/30 (HDMI only)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94 576p50
480i(NTSC)/576i(PAL)
Video Processing
Video Compression Visually Lossless
Test Pattern Generator Support Yes
Spectrum Analyzer Yes
Color Correction 17x17x17 3D LUT (supports 10-bit color)
Audio Processing
Audio Compression 48kHz 24-bit PCM
Outputs
Audio Output Embedded SDI/HDMI Audio Output (2 Channel)
Physical
Dimensions 122mm x 94mm x 27mm
Weight 292g (10.3oz)
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with 1/4″x20 and 3/8″x16 holes
Interfaces
Configuration Interfaces OSD with Menu, Joystick Navigation
Switches On/Off Switch
Mobile App Bolt App
Desktop App Bolt Manager application for OSX & Windows
Usb Interface Functionality Upgrade via USB-C 5pin Locking Connector CCU
Bluetooth 2.4 GHz
Network
Antennas 5 External 2 dBi antennas (included)
Wireless Non-DFS Frequencies:
5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz
DFS Frequencies:
5.270 ~ 5.670 GHz
Rf Channel Selection Auto, Manual
Encryption AES-256, RSA-1024 key exchange
Rf Power 21 dbm EIRP
Range Up to 5000 ft, line of sight
Unicast Multicast Can connect one Transmitter to up to 6 Receivers
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Interoperability Compatibility Can receive wireless video from all ranges of Bolt 4K XT and Bolt 4K LT transmitters (limited by shortest range device)
Power
Power Input 2-Pin Circular locking Connector 6-28 VDC
Battery None, optional Gold or V mount battery plate
Nominal Power Consumption 11 Watts
Environmental
Operating Temperature 0-40℃
Bolt 6 LT MAX RX Gold Mount
Bolt 6 LT MAX TX
Video
Video Outputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
1 x HDMI 1.4b Type-A receptacle
Sdi Ancillary Data Support Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Output Video Scaling No manual settings, but all signals above 4K30 for HDMI and 1080p60 for SDI are scaled down to 1080p for corresponding output
Video
Video Inputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
1 x HDMI 1.4b Type-A receptacle
Video Outputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
Sdi Ancillary Data Support Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Delay Tx To Rx <0.001sec
Input Cross Conversion Yes, HDMI to SDI (4Kp23.98-30 HDMI input is scaled and looped out as 1080p23.98-30 on SDI loopout)
Supported Resolutions
Supported Resolutions 4Kp23.98/24/25/29.97/30 (HDMI only)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94 576p50
480i(NTSC)/576i(PAL)
Supported Resolutions
Supported Resolutions 4Kp23.98/24/25/29.97/30 (HDMI only)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94 576p50
480i(NTSC)/576i(PAL)
Video Processing
Video Compression Visually Lossless
Test Pattern Generator Support Yes
Spectrum Analyzer Yes
Color Correction 17x17x17 3D LUT (supports 10-bit color)
Video Processing
Video Compression Visually Lossless
Color Correction None
Audio Processing
Audio Compression 48kHz 24-bit PCM
Audio Processing
Audio Compression 48kHz 24-bit PCM
Physical
Dimensions 122mm x 94mm x 27mm
Weight 292g (10.3oz)
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with 1/4″x20 and 3/8″x16 holes
Physical
Dimensions 60mm x 103mm x 33mm
Weight 206g (7.3oz)
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with 1/4″x20 and M3 holes
Interfaces
Configuration Interfaces OSD with Menu, Joystick Navigation
Switches On/Off Switch
Mobile App Bolt App
Desktop App Bolt Manager application for OSX & Windows
Usb Interface Functionality Upgrade via USB-C 5pin Locking Connector CCU
Bluetooth 2.4 GHz
Interfaces
Configuration Interfaces OSD with Menu, Joystick Navigation
Switches On/Off Switch
Mobile App Bolt App
Desktop App Bolt Manager application for OSX & Windows
Usb Interface Functionality Upgrade via USB-C 5pin Locking Connector CCU
Bluetooth 2.4 GHz
Network
Antennas 5 External 2 dBi antennas (included)
Wireless Non-DFS Frequencies:
5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz
DFS Frequencies:
5.270 ~ 5.670 GHz
Rf Channel Selection Auto, Manual
Encryption AES-256, RSA-1024 key exchange
Rf Power 21 dbm EIRP
Range Up to 5000 ft, line of sight
Unicast Multicast Can connect one Transmitter to up to 6 Receivers
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Interoperability Compatibility Can receive wireless video from all ranges of Bolt 4K XT and Bolt 4K LT transmitters (limited by shortest range device)
Network
Antennas 2 External 2dBi antennas (included)
Wireless Non-DFS Frequencies:
5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz
DFS Frequencies:
5.270 ~ 5.670 GHz
Rf Channel Selection Auto, Manual
Encryption AES-256, RSA-1024 key exchange
Rf Power 23 dbm EIRP
Range Up to 5000 ft, line of sight
Unicast Multicast Can connect one Transmitter to up to 6 Receivers
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Interoperability Compatibility Can transmit wireless video to all ranges of Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device)
Power
Power Input 2-Pin Circular locking Connector 6-28 VDC
Battery None, optional Gold or V mount battery plate
Nominal Power Consumption 11 Watts
Power
Power Input 2-Pin Circular locking Connector 6-28 VDC
Battery None, optional Sony/Canon dual battery plate
Nominal Power Consumption 9 Watts
Environmental
Operating Temperature 0-40℃
Environmental
Operating Temperature 0-40℃
Outputs
Audio Output Embedded SDI/HDMI Audio Output (2 Channel)
Inputs
Audio Input Embedded SDI/HDMI Audio Input (2 Channel)

Additional information

Brand

  • 1 x Bolt 6 LT 750 TX
  • 1 x Bolt 6 LT 750 RX
  • 1 x Lightstand Adapter ¼-20in
  • 1 x Hot Shoe Adaptor
  • 1 x (Bit 118) 2pin Conn. to PowerTap – 18in/46cm Cable
  • 2 x SDI – BNC to BNC Cable, 10in
  • 1 x PSU 2pin Conn. to 18W AC Adapter (Int) – 6ft Cable