Zacuto C500 Mark II Recoil with Dual Trigger Grips

The C500 Mark II Recoil with Dual Trigger Grips from Zacuto is a shoulder rig designed specifically for the Canon C500 Mark II camera. It includes a VCT Pro Baseplate, a dedicated Top Plate, Dual Trigger Grips, and a Recoil Handle. This rig balances directly over your shoulder, putting your camera body behind the shoulder and relocating focus, monitoring, and camera controls forward to create a lighter, shorter, and properly balanced rig.

Zacuto VCT Pro Baseplate
With built-in ergonomic shoulder pad, 10″ sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1″, and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8″ riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10″ sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4″-20 threaded holes on the side providing additional mounting options. 1/4″-20 and 3/8″-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5″ 15mm rods are included. One 1/4″-20 and one 3/8″-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

Key Features
Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
10″ sliding track (with spring-loaded lever) for balance adjustment after lens changes
VCT14-compatible V-wedge
1/4″-20 and 3/8″-16 tripod mount holes
Ergonomic gel polymer shoulder pad
15mm LWS rod adapter on the rear
Front rod adapter is vertically adjustable 1″; optional 1.8″ riser available from Zacuto for RED cameras
ARRI M6 rosette
Three 1/4″-20 threaded holes for accessories
Includes two 6.5″ 15mm rods
1/4″-20 and 3/8″-16 screws supplied
Made in the USA
Zacuto Rosette Dual Trigger Grips
The Zacuto Rosette Dual Trigger Grips are a 15mm LWS rod mount handgrip set featuring one wooden handgrip and one rosette relocator that allows you to attach any ARRI rosette-mount camera or lens grip. Each can be individually rotated a full 360° at the press a dedicated lever — there is no need to screw or unscrew any knob or lever but rather just press it on the fly. Furthermore, the wooden component of the wooden handgrip can also be adjusted forward and backward at the press of another lever, and same goes for your camera/lens grip once you attach it.

The handgrip and relocator are secured into sleeves and can be adjusted in length within the sleeves by loosening a corresponding lever for each one. They can be adjusted from 13 to 16″ in length, measuring from the base to the bottom of the handgrip. Scale markings are available on top to allow you to easily match up the positions of the handgrips. The handgrips are fully removable and you can incorporate a second wooden handgrip at a later time to alternate with the relocator.

Key Features
15mm LWS rod mount handgrip set
Includes a wooden handgrip and a rosette grip relocator that supports ARRI rosette-mount camera/lens grips
360° rotation at the press of a lever — no screwing/unscrewing
Forward/backward adjustment at the press of another lever
Length adjustable
Scale markings for easily matching the positions of the handgrips
Zacuto Canon C500 Mark II & C300 Mark III Top Plate
The dedicated Canon C500 Mark II & C300 Mark III Top Plate from Zacuto attaches to the top of your C500 Mark II or C300 Mark III camera body. It features an integrated Z-Rail that enables you to slide an attached handle forward and backward for improved balance. This plate incorporates a single 15mm rod bracket and a grooved mount for the camera’s LCD.

The top plate also features multiple 3/8″-16 and 1/4″-20 threads, as well as ARRI-style anti-twist mounts for attaching accessories.

Features
Integrated Z-Rail
Single 15mm rod bracket
Enables forward and backward top handle adjustment
Multiple 3/8″-16, 1/4″-20, and ARRI-style threads
Zacuto Recoil Handle
The Zacuto Recoil Handle is a maple-wood-lined handgrip that mounts to a Z-Rail or compatible mounting rail. This provides a comfortable yet secure handle for your camera rig, and the rail-style mounting allows you to adjust the handle along the length of the rail to improve your rigs balance. It features two cold shoe mounts (one vertical and one horizontal) and secures both mounts with a single lever. The integrated 1/4″-20 threaded mounting hole, and 15mm rod clamps further expand on the Recoil Handle’s usefulness.

Machined aluminum construction provides a balance of strength and weight, and the unit is anodized for corrosion and wear resistance. Large, spring-loaded locking levers provide a good grip and the capability of tightening the clamps without rotating the levers throughout the entire 360° range.

Key Features
The Recoil Handle clamps securely along the length of a Zacuto Z-Rail, allowing you to adjust the balance of your camera or camera rig. In addition to the Z-Rail, the handle is compatible with a variety of rails including: NATO, SWAT, RED, Picatinny, and Wooden Camera. You can mount the handle with the cold shoes or the rod clamps.
The maple-wood grip linings remain cool in hot weather and are generally considered to be more comfortable to hold. The wood is tooled to provide finger slots for increased comfort and grip.
The two cold shoes incorporate built-in stoppers and a single lever clamps both shoes simultaneously, securing your accessories. A 1/4″-20 accessory mounting point is threaded into the side of the cold shoe mounts.
Two offset 15mm rod clamps allow you to mount rods at right angles to each other. Each rod clamp features its own spring-loaded locking lever.